Install Syslog Server - Ubuntu

Por -
# Install syslog-ng package

$ sudo apt install syslog-ng
$ sudo mkdir /var/log/syslog-ng
$ sudo cp /etc/syslog-ng/syslog-ng.conf /etc/syslog-ng/syslog-ng.log.bak

# Server configuration

$ sudo vi /etc/syslog-ng/syslog-ng.conf

@version: 3.5
@include "scl.conf"
@include "`scl-root`/system/tty10.conf"

options { chain_hostnames(off); flush_lines(0); use_dns(yes); use_fqdn(no);
          owner("root"); group("adm"); perm(0640); stats_freq(0);
          bad_hostname("^gconfd$");

# default 514/UDP

source s_local { udp(); };

destination d_local { file("/var/log/syslog-ng/messages_${HOST}"); };

log { source(s_local); destination(d_local); };

# Restart

sudo systemctl start syslog-ng
sudo systemctl enable syslog-ng

Comentários

Postar um comentário

Postagens mais visitadas deste blog

Convert physical disk (GPT) to VHDx

Por -
How to do it: Use Disk2vhd to create a VHDX (or VHD, but I recommend VHDX) from your physical disk - it doesn't really matter which drives you check/uncheck as long as your Windows drive is checked. Create a Gen2 VM in Hyper-V and attach the new VHDX and your choice of Windows installation media (DVD or VHD). Boot the VM (it shouldn't matter what's listed first under the Firmware tab - it'll likely boot from your installation media anyway since your VHDX doesn't work yet). Hit Shift+F10 to bring up the Command Prompt (or click through troubleshooting buttons to the Command Prompt). Type "diskpart" and hit Enter. Type "list vol" and hit Enter - note the drive letter of your Windows volume (most likely the largest option), as well as which volume says Raw next to it. Type "sel vol #" where "#" is the number of the volume that says Raw next to it (this is the reason your VHDX doesn't "just work" when Disk2vhd has co...
Leia mais

How to Enable SSH on Cisco Switch, Router

Por -
1) Generate the RSA Keys      myswitch(config)# crypto key generate rsa             The name for the keys will be: myswitch.mydomain.com          How many bits in the modulus [512]: 1024      % Generating 1024 bit RSA keys, keys will be non-exportable...[OK] 2) Setup the Line VTY configurations     # line vty 0 4      (config-line)# transport input ssh     (config-line)# login local     (config-line)# password 7     (config-line)# exit 3) Setup the Console configuration      # line console 0      (config-line)# logging synchronous      (config-line)# login local 4) Verify SSH access      myswitch# sh ip ssh           SSH Enabled - version 1.99           Authentication timeout: 120 secs; Authentication retries: 3 That's it...
Leia mais